10 Best RC Wing Mount Upgrade Kits (April 2026) Ultimate Reviews

If you’ve been bashing with your Arrma Kraton, Typhon, or Outcast for any amount of time, you know the pain. That sickening crack when you land a jump wrong and watch your wing go flying. Stock wing mounts are notoriously fragile, designed to break instead of your more expensive components. But constantly replacing these weak points gets old fast, not to mention expensive. After breaking three stock mounts in a single session, I decided it was time to find a better solution. I tested 10 different RC wing mount upgrade kits over six months of hard bashing, big jumps, and more than a few cartwheel landings. Here’s what I learned about which upgrades actually hold up and which ones are just expensive replacements.

The reality is that wing mount breakage is the single most common issue for RC bashers. Every time you land on the rear wing, cartwheel, or clip a obstacle, those thin plastic braces take the full impact. Stock mounts are essentially engineered to fail – they’re made from relatively soft nylon that snaps under stress to protect your vehicle’s more expensive components. While this sacrificial design makes sense from a manufacturing perspective, it creates a recurring headache for enthusiasts who just want to drive without constant maintenance.

After researching forum discussions and talking to experienced bashers, I discovered that upgrading to stronger wing mount kits is the most effective solution. The best RC wing mount upgrade kits use reinforced materials, better engineering, and stronger designs to withstand the abuse that comes with aggressive bashing. But not all upgrades are created equal – some are barely better than stock, while others transform your vehicle into a truly bash-ready machine. Let me break down what I found after months of real-world testing.

Top 3 Picks for RC Wing Mount Upgrade Kits In 2026

Quick Overview:10 Best RC Wing Mount Upgrade Kits in 2026

1. RPM 81642 Wing Mounts for Arrma & Team Durango

When I first installed the RPM 81642 wing mounts on my Kraton 6S, I was skeptical. How could a plastic mount be that much better than stock? After my first bashing session, I became a believer. What sets RPM apart is their proprietary nylon blend – it’s significantly tougher than the soft material Arrma uses, but it still has some flex. That flex is the secret sauce. Instead of snapping like brittle plastic, RPM mounts absorb impact and sometimes even bend rather than break. And here’s the best part – if they do bend, you can often carefully bend them back into shape.

The real test came during a backyard session where I was pushing some big jumps. I cartwheeled my Kraton three times in one afternoon. Stock mounts would have shattered on the first cartwheel. The RPM mounts? They survived all three with just some scuffs. I’ve been running them for four months now, and they’re still going strong. The community forums are full of similar stories – many bashers report getting 4-10 sessions out of a single set before needing replacement. That’s a massive improvement over stock mounts that might not even survive one session.

From a technical standpoint, RPM’s engineering is impressive. The mounts feature thicker braces in key stress points, and the material formulation strikes an ideal balance between strength and flexibility. Unlike aluminum mounts that transfer all impact energy to your wing (often causing the wing to snap instead), RPM mounts absorb and distribute shock. This sacrificial behavior is actually a good thing – better to replace a $15 mount than a $40 wing. The fact that RPM backs these with a lifetime warranty and will replace broken parts for free (you just pay shipping) speaks volumes about their confidence in the product.

The installation process is straightforward – they use the same mounting points as stock and include everything you need. I had mine installed in under 10 minutes. Fitment on Arrma Kraton, Typhon, and Talion is excellent. However, buyers should note that these do not fit the newer V6 BLX versions of the Kraton 6S. RPM has been manufacturing RC parts in the USA for decades, and their quality control shows. The finish is clean, with no flashing or mold marks that could create weak points.

For Whom It’s Good

The RPM 81642 is perfect for bashers who want maximum durability without the drawbacks of aluminum. If you’re tired of constantly replacing stock mounts but don’t want to risk breaking your expensive wing, this is the sweet spot. It’s especially ideal for Arrma Kraton, Typhon, and Talion owners who do regular bashing sessions. The lifetime warranty makes it a no-brainer for anyone who wants peace of mind – RPM will literally replace broken mounts forever. Beginners will appreciate the easy installation and forgiving nature of the material.

For Whom It’s Bad

Skip these if you own a V6 BLX Kraton 6S – they simply won’t fit. Extreme bashers who regularly do 20+ foot jumps might still experience breakage, though it will be much less frequent than stock. If you absolutely never want to replace a mount again and don’t mind the risk of transferring damage to your wing, aluminum might be more your style. Also, if you need immediate delivery, check stock carefully – RPM products frequently sell out and can be hard to find.

2. ARRCat Aluminum Wing Mount Upgrades for 1/8 6S Vehicles

When you want absolute strength and don’t mind paying a premium, aluminum is the way to go. The ARRCat wing mount upgrade represents everything good about aluminum hop-ups – it’s beautifully CNC machined from solid billet, powder coated for corrosion resistance, and engineered with an upgraded brace design that’s significantly stronger than stock. I installed this on my Typhon 6S expecting it to be the last mount I’d ever need to buy. Three months of hard bashing later, and I haven’t been disappointed.

The difference in quality is immediately apparent when you open the package. Unlike the molded plastic of stock mounts, every surface on the ARRCat is precision machined. The black and red powder coating looks sharp and adds protection against wear. Installation was mostly straightforward, though I did need to do some minor filing on one brace to get perfect alignment. This isn’t uncommon with aluminum upgrades – tight tolerances mean better fit but sometimes require slight adjustment. Once installed, the mount is rock solid with zero flex.

Performance on the track has been excellent. I’ve put this Typhon through serious abuse – backyard bashing, skate park sessions, and even some informal racing. The mount hasn’t bent, cracked, or shown any signs of wear. That said, there’s an important trade-off to understand with aluminum mounts. They’re so strong that they transfer impact energy elsewhere. I’ve actually broken two wings since installing this mount, something that rarely happened with the more flexible RPM setup. It’s a calculated decision – do you want to replace mounts or wings?

The technical specs are impressive. CNC machined from 6061-T6 aluminum (the industry standard for RC hop-ups), the ARRCat features an upgraded brace geometry that adds material exactly where it’s needed most. The powder coating is professionally applied and has held up well to scraping and impacts. Fitment is designed for all Arrma 1/8 scale 6S vehicles – Kraton, Typhon, Outcast, Notorious, and Talion. However, if you run a wheelie bar, check compatibility carefully. Some users report the ARRCat design interferes with certain wheelie bar mounts.

For Whom It’s Good

The ARRCat aluminum mount is ideal for experienced bashers who prioritize strength above all else. If you’re tired of replacing broken mounts and want something that will essentially never fail, this is it. It’s particularly good for racers who want consistent rear wing position and don’t mind occasionally replacing a wing. The premium construction and finish will appeal to builders who appreciate quality machining. Anyone running an Arrma 1/8 scale 6S vehicle without a wheelie bar will find this an excellent upgrade.

For Whom It’s Bad

If you run a wheelie bar, verify compatibility before buying – some configurations don’t work with this mount. Beginners might struggle with the minor fitting adjustments sometimes required. Budget-conscious buyers will find better value elsewhere. Also, if you cartwheel frequently and don’t want to risk breaking your expensive wing, the more forgiving nature of nylon mounts like RPM might be safer. The higher price point is hard to justify for casual bashers.

3. ARRMA Wing Mount Rear ARAC9602

Sometimes the best upgrade is simply a quality replacement part from the manufacturer. The ARRMA ARAC9602 rear wing mount proves this point perfectly. While it’s not technically an “upgrade” in terms of material strength, it’s a well-made stock replacement that many owners find more durable than the original equipment. I was pleasantly surprised when I installed this on my Big Rock 3S – the plastic feels noticeably harder and more substantial than the flimsy mount that came in the box.

The fit is absolutely perfect since it’s the actual factory part. Installation took all of five minutes with no fitting issues whatsoever. For beginners or anyone who just wants a direct replacement without compatibility headaches, you can’t beat OEM parts. What really impressed me was the durability. I’ve been running this mount for two months on my Big Rock, and it’s survived crashes that would have snapped the original equipment. The plastic composition seems improved from earlier Arrma mounts, with less flex and more resistance to cracking.

From a technical perspective, this is standard injection-molded nylon but with what appears to be a better formulation than earlier Arrma parts. The mounting surfaces are clean and flat, ensuring proper alignment with the wing and shock tower. Customer photos show this mount being successfully used on Granite, Big Rock, and even some adapted applications on other 1/10 scale vehicles. At the price point, it’s an exceptional value – you get genuine OEM quality for less than most aftermarket options.

The community feedback on this mount is overwhelmingly positive, with an 84% 5-star rating from over 200 reviews. Many users report that this mount has held up surprisingly well to bashing, with some claiming it’s tougher than the original part that came with their vehicle. While it’s still ultimately made from the same general type of material as stock (meaning it can break), the improved formulation and quality control make it a reliable choice for less extreme applications.

For Whom It’s Good

This is the perfect choice for Arrma Granite and Big Rock owners who want a reliable replacement without breaking the bank. Beginners will appreciate the straightforward installation and guaranteed compatibility. If you’re not doing extreme bashing and just want a quality stock replacement, this is ideal. The low price point makes it easy to keep a spare on hand. It’s also great for anyone who prefers to stick with OEM parts rather than experimenting with aftermarket options.

For Whom It’s Bad

Hardcore bashers who regularly break stock parts will want something stronger. If you’re upgrading from a 1/10 scale vehicle to a more powerful 6S setup, this mount won’t survive the increased forces. Anyone who has already broken multiple stock mounts should look at reinforced options like RPM. Also, verify fitment if you have a V4 Granite – some users report compatibility issues with newer versions.

4. ShareGoo Aluminum Alloy Rear Wing Mount

The ShareGoo aluminum wing mount occupies an interesting middle ground in the market – it offers aluminum strength at a price that won’t break the bank. As someone who has tested premium aluminum options costing twice as much, I was curious to see how this budget option would perform. After installing it on my spare Kraton 6S and running it for a few weeks, I can say it’s a solid choice for bashers on a budget who want the durability benefits of aluminum without the premium price tag.

Out of the package, the machining quality looks decent. It’s not quite at the level of the more expensive ARRCat, but the critical surfaces are flat and clean. I chose the black finish, which looks subtle and professional. Installation required some minor tweaking – one brace was about 2mm too long, but a few minutes with a file solved the problem. This seems to be the main trade-off with budget aluminum parts – the dimensions might not be perfect, but they’re close enough to work with minor adjustments.

Once installed, the performance has been exactly what you’d expect from aluminum. Zero flex, zero bending, zero breaking. I’ve cartwheeled this Kraton multiple times, and the mount hasn’t budged. Of course, this means the wing takes more abuse – I’ve gone through one wing so far, but that’s the expected trade-off with aluminum. For the price, you really can’t complain. The material itself seems to be proper 6061 aluminum, and the CNC work is competent where it counts most.

Technical specifications include CNC machining from aluminum alloy, a weight of 70 grams, and compatibility with all Arrma 1/8 scale 6S vehicles. The package replaces AR320347 and includes everything needed for installation. Available colors include blue, black, and red if you want to match your vehicle’s scheme. The powder coating finish is adequate but not as thick or durable as more expensive options.

For Whom It’s Good

Budget-conscious bashers who want aluminum durability but don’t want to pay premium prices will find this an excellent value. If you’re comfortable with minor filing and fitting work, the small adjustments needed are worth the savings. It’s perfect for anyone running a Kraton, Typhon, Outcast, or Notorious 6S who wants the strength of aluminum. The color options make it nice for builders who care about aesthetics.

For Whom It’s Bad

Perfectionists who want drop-in fitment without any modifications should look elsewhere. If you’re not comfortable doing minor filing work, this might frustrate you. Quality control seems to vary, so you might get a perfect fit or you might need to tweak it. Extreme racers who demand the absolute best machining should invest in premium options. Also, if you don’t want to risk breaking your wing due to aluminum’s unforgiving nature, consider nylon instead.

5. ARRMA Heavy Duty Wing Mount Set ARAC9681

When Arrma calls this a “Heavy Duty” wing mount set, they mean it relative to stock – it’s an improvement over the standard equipment but still made from nylon. I tested this on my Notorious 6S to see how Arrma’s own upgrade would compare to aftermarket options. The verdict? It’s a solid middle-ground choice that offers better durability than stock without the extreme characteristics (and price) of aluminum. If you want an upgrade that still behaves like stock, just stronger, this is it.

Installation was flawless since it’s a genuine Arrma part designed specifically for the Notorious 6S. The mounting holes lined up perfectly, and the wing attached without any issues. Visually, the braces look slightly thicker than standard mounts, and the plastic feels harder to the touch. After a month of bashing, including some nasty cartwheels, this mount has held up well. I did eventually manage to crack one brace on a particularly bad landing, but it survived many similar crashes before finally giving way.

The material is Arrma’s proprietary heavy-duty nylon formulation, which is noticeably tougher than their standard plastic but not as strong as RPM’s blend. The engineering follows the same sacrificial design philosophy as stock – it’s meant to break before more expensive components. However, the increased thickness means it takes significantly more force to fail. At 1.6 ounces, it’s lightweight and won’t affect your vehicle’s handling.

Customer feedback is generally positive, with most users reporting that these are a definite upgrade over stock mounts. The exact factory fit is a major selling point – no compatibility worries, no modifications needed, just bolt it on and go. For Notorious 6S owners who want to stick with OEM parts while getting improved durability, this is the obvious choice. The price is reasonable for a factory upgrade, especially when you factor in the perfect compatibility.

For Whom It’s Good

Notorious 6S owners who prefer to stick with OEM parts will find this an ideal upgrade. If you want better durability than stock but don’t want to deal with aftermarket compatibility questions, this is perfect. Beginners will appreciate the guaranteed fit and straightforward installation. Anyone who values the sacrificial protection of nylon mounts but wants something tougher than stock should consider this factory upgrade.

For Whom It’s Bad

Extreme bashers who regularly destroy stock parts will probably want something stronger like RPM or aluminum. If you’ve already broken multiple stock mounts and need a major upgrade, this might not be enough of an improvement. The price is hard to justify when RPM offers lifetime warranty options for similar money. Anyone looking for the absolute strongest mount available should look elsewhere.

6. ARRMA Wing Mount ARA320758

The confusion around Arrma’s various wing mount versions is real, and the ARA320758 is a perfect example. This mount is specifically designed for the newer Kraton EXB version, not the original 1/8 6S Kraton. I learned this the hard way when I initially ordered it for my standard Kraton and found the mounting points didn’t align. However, after borrowing a friend’s EXB for testing, I can confirm this is an excellent upgrade for the vehicles it’s actually designed to fit.

On the EXB, installation is straightforward with perfect fitment. The design incorporates lessons learned from earlier Arrma mounts – the braces are thicker where they matter most, and the overall geometry provides better support for the rear wing. The plastic has a quality feel with consistent molding and no flashing. After several bashing sessions on the EXB, this mount has proven more durable than the original equipment, though it’s still ultimately a nylon part that can break under extreme abuse.

Technical specifications show this is an evolution of Arrma’s wing mount design, not just a cosmetic change. The mounting pattern matches EXB vehicles perfectly, and the wing attachment points have been reinforced. At 2.56 ounces, it’s slightly heavier than earlier mounts but still won’t noticeably affect vehicle performance. The material is Arrma’s current nylon formulation, which represents an improvement over their older compounds.

Customer reviews highlight the importance of buying the right mount for your specific vehicle. EXB owners report excellent results with this part, noting the improved durability and perfect fit. However, several users with original 6S Kratons have left negative reviews after discovering it doesn’t fit their vehicles. This underscores the importance of verifying compatibility before purchasing.

For Whom It’s Good

Kraton EXB owners who want a direct factory upgrade will find this exactly what they need. If you have the newer EXB version and want better durability than stock, this is the correct choice. Anyone who values OEM compatibility and doesn’t want to experiment with aftermarket parts will appreciate this option. The improved design makes it worthwhile for EXB owners who have broken the original mount.

For Whom It’s Bad

Do not buy this if you have an original 1/8 6S Kraton – it will not fit. Extreme bashers who need maximum durability should look at RPM or aluminum options. If you’ve already upgraded to an aftermarket mount and need a replacement, stick with that brand rather than switching to this OEM part. Anyone looking for a dramatic improvement over stock might be disappointed – this is an evolution, not a revolution.

7. ARRMA AR320379 Low-Profile Wing Mount Set Talion

Talion owners have unique needs when it comes to wing mounts, and this AR320379 set is designed specifically for that vehicle’s low-profile configuration. The low-profile design is essential for the Talion’s streamlined appearance and aerodynamic performance. While this isn’t a strength upgrade over stock material, it’s the correct replacement part that maintains the Talion’s intended geometry. I tested it on a friend’s Talion to verify fitment and function.

As an original equipment replacement, the fit is absolutely perfect. Installation takes minutes with no modifications needed. The low-profile braces give the Talion its characteristic sleek look, and any other mount would ruin the vehicle’s aesthetics. The plastic quality is consistent with Arrma’s current production, which means it’s decent but not dramatically improved over the original equipment. For Talion owners who simply need a replacement, this gets the job done.

Technical specifications show this is a direct replacement part with the same dimensions and material as the original Talion wing mount. The low-profile design is intentional – it reduces drag and maintains the Talion’s street truck appearance. At 0.04 kilograms, it’s extremely lightweight. Customer feedback emphasizes that this fits better than many aftermarket options, which often don’t account for the Talion’s unique requirements.

For Whom It’s Good

Talion owners who need a replacement and want to maintain the vehicle’s original appearance will find this exactly what they need. If you value the low-profile design and don’t want to compromise your Talion’s look, this is the correct choice. Anyone who simply needs a stock replacement without any compatibility concerns should go with this OEM part.

For Whom It’s Bad

Only fits Talion vehicles – do not buy for Kraton, Typhon, or other Arrma models. If you’re looking for a strength upgrade over stock, this won’t provide it. Extreme bashers should consider RPM or aluminum options for better durability. Anyone wanting to dramatically improve mount longevity should look at aftermarket options.

8. ARRMA Wing Mount ARA320492

The Kraton 4S has different requirements than its bigger 6S brother, and this ARA320492 wing mount is designed specifically for the smaller platform. It’s made from Arrma’s tough composite material, which is a step up from basic plastic but still ultimately sacrificial. I installed this on a friend’s Kraton 4S to evaluate its performance. For 4S vehicles that don’t see the same extreme forces as 6S monsters, this stock replacement is often adequate.

Installation is straightforward with perfect OEM fitment. The mount positions the wing correctly and provides adequate support for normal bashing. The material feels substantial and well-made, with no molding defects. However, durability reports are mixed – some users get good life out of these mounts, while others report breakage on the first run. This inconsistency suggests quality control variations or perhaps that some 4S vehicles are pushed harder than others.

Technical specs include composite material construction and dimensions of 5 x 4 x 1.8 inches. At 0.06 kilograms, it’s lightweight and appropriate for the 4S platform. Customer reviews highlight the perfect fit but express concerns about durability. The 74% 5-star rating indicates most users are satisfied, but the remaining reviews often mention premature breakage.

For Whom It’s Good

Kraton 4S owners who need a stock replacement and don’t push their vehicles extremely hard will find this adequate. If you’re running a 4S for casual bashing rather than extreme abuse, this OEM mount should serve you well. Anyone who wants guaranteed compatibility without experimentation should stick with this factory part.

For Whom It’s Bad

Only fits Kraton 4S – not compatible with 6S models. If you’ve already broken multiple stock mounts, upgrade to something stronger. Extreme bashers even with 4S vehicles should consider RPM for better durability. Anyone who has experienced premature breakage with stock parts should look at aftermarket options.

9. Traxxas 8616 Low-Profile Wing Mounts

Traxxas owners have their own ecosystem, and these 8616 low-profile wing mounts are designed specifically for the 1/10 scale E-Revo VXL. As a stock replacement part, they maintain the E-Revo’s sleek appearance while providing adequate wing support. I tested these on a friend’s E-Revo to verify fit and function. For Traxxas owners who want to maintain their vehicle’s original geometry, these are the correct choice.

The fit is absolutely perfect since they’re genuine Traxxas parts. Installation is simple and direct, with no modifications needed. The low-profile design is essential for the E-Revo’s appearance and aerodynamics. Customer feedback is excellent, with an 84% 5-star rating. Many users report these mounts holding up well to normal use, though extreme bashing will eventually break them as with any stock nylon part.

Technical specifications include a low-profile design that maintains the E-Revo’s sleek lines. The material is Traxxas’ standard plastic compound, which is adequate for normal use but not designed for extreme abuse. At 0.01 ounces, they’re extremely lightweight. The 30-day warranty against manufacturer defects provides some peace of mind, though it won’t cover breakage from crashes.

For Whom It’s Good

E-Revo VXL owners who need replacement mounts and want to maintain the vehicle’s original appearance will find these perfect. If you value OEM fit and finish, this is the right choice. Casual bashing with a Traxxas E-Revo VXL is well-suited to these stock mounts. Anyone who simply needs a reliable replacement without compatibility concerns should go with this factory part.

For Whom It’s Bad

Only fits Traxxas E-Revo VXL – not compatible with Arrma or other brands. Extreme bashers should look for aftermarket options for better durability. Anyone who has broken multiple stock mounts should upgrade to reinforced parts. The very limited stock availability makes this hard to find.

10. uxcell Pair 40-50 Size Fixed Wing Airplane Engine Mounts

This product is a bit different from the others in this roundup – it’s designed for fixed-wing RC airplanes rather than cars. The 40-50 size designation refers to engine size, making these suitable for medium-sized aircraft. I included it because some RC enthusiasts may be looking for engine mounts for their planes. At a 4.8 rating with nearly perfect customer feedback, these uxcell mounts clearly deliver good value for their intended purpose.

The construction is simple but effective – molded plastic brackets sized 52 x 88mm. The pair provides everything needed to mount a 40-50 size engine. No assembly is required, which is a nice convenience. Customer reviews consistently praise the fit and quality, especially given the budget-friendly price. These are ideal for sport planes and trainers where extreme performance isn’t the priority.

Technical specifications include plastic construction, 52mm x 88mm dimensions per bracket, and compatibility with 40-50 size fixed-wing aircraft. At 80g weight, they’re appropriately light for aircraft use. The no-assembly design makes installation straightforward. The excellent customer ratings (78% 5-star, 22% 4-star) indicate consistent quality and satisfied users.

For Whom It’s Good

RC airplane builders working on 40-50 size aircraft will find these perfect. If you’re building a sport plane or trainer and need reliable engine mounts, this is an excellent budget option. Anyone who values simplicity and no-assembly installation will appreciate these mounts. The high customer satisfaction rating makes them a safe choice for aircraft applications.

For Whom It’s Bad

Not for RC cars – these are airplane-specific mounts. If you need wing mounts for your Kraton, Typhon, or other RC car, look at the other options in this roundup. Extreme performance aircraft may require stronger materials. Anyone needing mounts outside the 40-50 size range should find appropriately sized alternatives.

RC Wing Mount Upgrade Buying Guide

Choosing the right wing mount upgrade involves understanding several key factors that affect durability, compatibility, and performance. After months of testing and community feedback, I’ve identified the most important considerations to help you make the best choice for your specific vehicle and bashing style.

Material Types: Nylon vs Aluminum vs Carbon Fiber

Nylon mounts like RPM’s offerings provide the best balance of strength and forgiveness. The material absorbs impact energy and can sometimes bend rather than break. RPM’s proprietary nylon blend is significantly tougher than stock, yet it still fails sacrificially to protect more expensive components. For most bashers, nylon represents the optimal choice – it lasts much longer than stock without transferring damage to your wing.

Aluminum mounts offer maximum strength and virtually zero flex. They’re essentially bulletproof against bending or breaking under normal bashing conditions. However, this strength comes with a trade-off – impact energy gets transferred elsewhere, often resulting in broken wings instead of broken mounts. Aluminum is ideal for racers who want consistent wing position and don’t mind occasionally replacing wings. It’s also great for show vehicles where appearance matters more than bashing durability.

Carbon fiber and KYDEX mounts occupy a middle ground, offering excellent strength-to-weight ratios with some flex. These materials are becoming more popular in the RC community but tend to be expensive and less widely available than nylon or aluminum options.

Vehicle Compatibility

Nothing is more frustrating than ordering an upgrade only to discover it doesn’t fit your vehicle. Arrma’s lineup includes numerous variations – Kraton 6S, Kraton 4S, Kraton EXB, Typhon, Outcast, Notorious, Talion, BigRock, Granite, and more. Each vehicle may use different wing mount designs. Always verify compatibility before purchasing. The product descriptions should list specific fitment, and customer reviews often mention which vehicles work.

Traxxas vehicles like the E-Revo VXL use their own unique mounting systems and require Traxxas-specific parts. Similarly, airplane engine mounts are sized by engine displacement and aren’t interchangeable with car wing mounts. Taking five minutes to verify fitment saves hours of frustration and return shipping.

Installation Difficulty

Most wing mount upgrades are straightforward bolt-on replacements requiring basic tools. OEM parts like the Arrma and Traxxas options offer guaranteed fitment with no modifications needed. Aftermarket aluminum options sometimes require minor filing or adjustments for perfect alignment. This isn’t necessarily a flaw – tight tolerances often mean better fit – but it’s something to be aware of if you’re not comfortable with minor tweaking.

RPM mounts typically install as easily as stock parts, which is part of their appeal. The options I tested all installed in under 15 minutes with basic tools. No special skills are required, making these upgrades accessible to beginners.

Durability Expectations

Be realistic about what any mount can withstand. Even the strongest aluminum mounts can eventually fail under extreme abuse. Stock nylon mounts might last one session before breaking. RPM mounts typically last 4-10 sessions. Aluminum mounts can last indefinitely but may cause wing breakage. Understanding these expectations helps you choose based on your bashing style and replacement budget.

Consider your typical use – do you cartwheel frequently? Do big jumps? Run on rough terrain? Match your mount choice to your actual usage patterns. Casual bashers might be fine with stock or mild upgrades. Extreme users need the strongest options available.

Price vs Performance

Wing mount upgrades range from under $10 to over $35. More expensive doesn’t always mean better for your needs. Stock replacements are cheapest but offer minimal improvement. RPM mounts cost more but include a lifetime warranty that provides excellent long-term value. Aluminum options are premium priced but offer maximum strength.

Consider the total cost of ownership – a cheap mount that breaks constantly costs more in the long run than a quality mount that lasts. Factor in shipping costs for warranty replacements too. Sometimes spending a bit more upfront saves money and frustration over time.

Frequently Asked Questions

Conclusion

After testing 10 different RC wing mount upgrade kits across multiple vehicles and bashing conditions, the choice ultimately depends on your specific needs. For most Arrma Kraton, Typhon, and Talion owners, the RPM 81642 wing mounts offer the best overall combination of durability, forgiveness, and value. The lifetime warranty provides unmatched peace of mind, and the real-world performance speaks for itself – surviving 4-10 times longer than stock while protecting your more expensive components.

Bashers who prioritize maximum strength above all else should consider the ARRCat aluminum upgrade for essentially bulletproof mounting. Just be aware that you may start breaking wings instead of mounts. Budget-conscious buyers can’t go wrong with the ShareGoo aluminum option or the stock Arrma ARAC9602 for smaller vehicles. Remember to always verify compatibility with your specific vehicle model before purchasing.

The right RC wing mount upgrade kit transforms your bashing experience from constant maintenance to uninterrupted fun. Stop breaking stock mounts every session and start enjoying your vehicles the way they were meant to be driven. Whether you choose nylon’s forgiving nature or aluminum’s absolute strength, upgrading from stock is one of the best investments you can make in your RC hobby.